Tuning the fill percentage in the hydrothermal synthesis process to increase catalyst performance for ozone decomposition

The performance of Ce-OMS-2 catalysts was improved by tuning the fill percentage in the hydrothermal synthesis process to increase the oxygen vacancy density. The Ce-OMS-2 samples were prepared with different fill percentages by means of a hydrothermal approach (i.e. 80%, 70%, 50% and 30%). Ce-OMS-2 with 80% fill percentage (Ce-OMS-2-80%) showed ozone conversion of 97%, and a lifetime experiment carried out for more than 20?days showed that the activity of the catalyst still remained satisfactorily high (91%). For Ce-OMS-2-80%, Mn ions in the framework as well as K ions in the tunnel sites were replaced by Ce⁴⁺, while for the others only Mn ions were replaced. O₂-TPD and H₂-TPR measurements proved that the Ce-OMS-2-80% catalyst possessed the greatest number of mobile surface oxygen species. XPS and XAFS showed that increasing the fill percentage can reduce the AOS of Mn and augment the amount of oxygen vacancies. The active sites, which accelerate the elimination of O₃, can be enriched by increasing the oxygen vacancies. These findings indicate that increasing ozone removal can be achieved by tuning the fill percentage in the hydrothermal synthesis process.     

Effects of SO2 and H2O on low-temperature NO conversion over F-V2O5-WO3/TiO2 catalysts

F-V_2 O_5-WO3/Ti02 catalysts were prepared by the impregnation method.As the content of F ions increased from 0.00 to 0.35 wt.%,the NO conversion of F-V_2 O_5-WO_3/TiO_2 catalysts initially increased and then decreased.The 0.2 F-V_2 O_5-WO_3/TiO_2 catalyst(0.2 wt.% F ion)exhibited the best denitration(De-NOx) performance,with more than 95% NO conversion in the temperature range 160-360℃,and 99.0% N2 selectivity between 110 and 280℃.The addition of an appropriate amount of F ions eroded the surface morphology of the catalyst and reduced its grain size,thus enhancing the NO conversion at low temperature as well as the sulfur and water resistance of the V_2 O_5-WO3/Ti02 catalyst.After selective catalytic reduction(SCR) reaction in a gas flow containing SO_2 and H_2 O,the number of NH3 adsorption sites,active component content,specific surface area and pore volume decreased to different degrees.Ammonium sulfate species deposited on the catalyst surface,which blocked part of the active sites and reduced the NO conversion performance of the catalyst.On-line thermal regeneration could not completely recover the catalyst activity,although it prolonged the cumulative life of the catalyst.In addition,a mechanism for the effects of S02 and H_2 O on catalyst NO conversion was proposed.     

Recent advances in catalytic decomposition of ozone

Ozone (O₃), as a harmful air pollutant, has been of wide concern. Safe, efficient, and economical O₃ removal methods urgently need to be developed. Catalytic decomposition is the most promising method for O₃ removal, especially at room temperature or even subzero temperatures. Great efforts have been made to develop high-efficiency catalysts for O₃ decomposition that can operate at low temperatures, high space velocity and high humidity. First, this review describes the general reaction mechanism of O₃ decomposition on noble metal and transition metal oxide catalysts. Then, progress on the O₃ decomposition performance of various catalysts in the past 30 years is summarized in detail. The main focus is the O₃ decomposition performance of manganese oxides, which are divided into supported manganese oxides and non-supported manganese oxides. Methods to improve the activity, stability, and humidity resistance of manganese oxide catalysts for O₃ decomposition are also summarized. The deactivation mechanisms of manganese oxides under dry and humid conditions are discussed. The O₃ decomposition performance of monolithic catalysts is also summarized from the perspective of industrial applications. Finally, the future development directions and prospects of O₃ catalytic decomposition technology are put forward.     

Morphology-dependent interfacial interactions of Fe2O3 with Ag nanoparticles for determining the catalytic reduction of p-nitrophenol

In this work,we fabricated three kinds of Ag/Fe_2O_3 model catalysts with different morphologies to study the interfacial interactions between Ag and Fe_2O_3,and how they affected the catalytic activity in hydrogenation of p-nitrophenol was explored.The hydrothermal method was used to synthesize the metal oxide supported silver catalyst,with various morphologies including nanoplates(NPs),nanospheres(NSs),and nanocubes(NCs).The crystal structure,morphology and surface elements of the composite were investigated by various measurements,such as X-ray diffraction(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM) and X-ray photoelectron spectroscopy(XPS).The catalytic activity was also evaluated by the reduction of p-nitrophenol to p-aminophenol.It was found that the activities of the above catalysts varied with the morphology of the support.Among them,Ag/Fe_2O_3 NPs promoted the highest performance,Ag/Fe_2O_3 NSs were slightly inferior,and Ag/Fe_2O_3 NCs were the worst.At last,we ascribed the remarkable activity of Ag/Fe_2O_3 NPs to the strong metal-support interactions between Ag and Fe_2O_3.     

Reviews of emission of biogenic volatile organic compounds (BVOCs) in Asia

Biogenic volatile organic compounds (BVOCs) in the atmosphere play important roles in the formation of ground-level ozone and secondary organic aerosol (SOA) in global scale and also in regional scale under some condition due to their large amount and relatively higher reactivity. In places with high plant cover in the tropics and in China where air pollution is serious, the effect of BVOCs on ozone and secondary organic aerosols is strong. The present research aims to provide a comprehensive review about the emission rate, emission inventory, research methods, the influencing factors of BVOCs emissions, as well as their impacts on atmospheric environment quality and human health in recent years in Asia based on the summary and analysis of literatures. It is suggested to use field direct measurement method to obtain the emission rate and model method to calculate the emission amount. Several recommendations are given for future investigation and policy development on BVOCs emission.     

达里诺尔湖水体DOM荧光特征及其来源解析

达里诺尔湖（简称“达里湖”）是内蒙古自治区高原地区重要的生态屏障,探究达里湖水质状况及污染来源,对加强流域水环境治理、改善水环境质量具有十分重要的意义.于2018年9月及2019年6月对湖水进行采样,并通过三维荧光光谱结合PARAFAC（平行因子分析）模型,探究达里湖水体DOM（溶解性有机质）来源及其与水质的关系.结果表明:①达里湖水体中pH较高,ρ（DOC）（DOC为溶解性有机碳）、ρ（NH₄+-N）、ρ（TP）相对较高,均超过GB 3838—2002《地表水环境质量标准》Ⅴ类水质标准限值.②水体中DOM含4种荧光组分.夏季水体DOM主要分布于河流入湖口附近,其中,类腐殖质荧光组分（紫外区类富里酸和可见区类富里酸）占总组分的62.93%,类蛋白类荧光组分（类色氨酸和类酪氨酸）占总组分的36.07%;秋季水体DOM主要分布于东南侧,其中,类腐殖质荧光组分占总组分的40.52%,类蛋白类荧光组分占总组分的59.48%.③达里湖采样点荧光参数表明,达里湖DOM自生源特征较强,腐殖化程度较低.类腐殖质荧光组分与ρ（DOC）、ρ（Chla）均呈正相关,类色氨酸荧光组分与pH呈正相关,类络氨酸与ρ（DTN）、ρ（NH4+-N）、ρ（DTP）均呈正相关.研究显示,达里湖DOM具有陆源与生物源双重特性,DOM的形成与微生物、细菌、浮游生物的生命活动密切相关.      

洞庭湖区南汉垸水体浮游植物群落结构特征及其影响因素

环境要素的变化对浮游植物的群落结构和功能具有重要影响.为揭示洞庭湖南汉垸湖区浮游植物群落结构特征及其影响因素,分别于2017年11月（关泵封水期）和2018年6月（开泵放水期）在洞庭湖区典型堤垸——南汉垸进行了采样调查,并对调查区域内的浮游植物及主要水环境因子进行了系统监测和分析.结果表明:①调查期间共检出浮游植物8门62属,主要隶属于绿藻门（Chlorophyta）、硅藻门（Bacillariophyta）和蓝藻门（Cyanophyta）,浮游植物分布表现出较为显著的时间差异性,11月浮游植物的丰度为8.34×106~3.02×108 L-1,6月为1.13×106~2.04×107 L-1.②Shannon-Wiener多样性指数（H'）介于1.10~3.24之间,Margalef丰富度指数（d）介于1.42~6.40之间,Pielou均匀度指数（J）介于0.48~0.87之间,多样性评价表明,南汉垸整体上介于轻污染与β-中污染之间,局部采样点为α-中污染.③PCA（主成分分析）结果表明,ρ（TN）、ρ（TP）和ρ（NH₄+-N）为南汉垸水体的主要污染因子.④RDA（冗余分析）结果表明,南汉垸浮游植物群落结构分布与pH、ρ（NH₄+-N）及ρ（TN）呈正相关,与WT（水温）呈负相关.研究显示,南汉垸水体介于轻污染与β-中污染之间,营养状态及浮游植物群落结构在时间上差异较大.      

生物炭复合青霉菌修复砷污染土壤对其微生物群落功能多样性的影响

真菌修复砷污染土壤是一种能够有效吸附固化环境中砷的重要措施.生物炭作为目前修复重金属的热点,其多空疏松的结构、较高的离子交换量、丰富的有机碳含量等都说明了其在土壤修复中的地位.为了探究生物炭与青霉菌在修复砷污染土壤的同时对土壤中微生物活性及其多样性的影响,在室内孵育条件下,运用Biolog法研究了3×3随机区组试验（3个生物炭梯度分别为0%、2%、4%,3个青霉菌梯度分别为0%、10%、20%）下土壤微生物对不同类型碳源的利用能力以及多种功能性指数的影响.结果表明:①添加青霉菌与生物炭后,土壤中有效砷含量较对照组显著下降,从而影响其微生物群落功能多样性.②砷污染土壤中微生物群落功能多样性、碳源利用丰富度随生物炭浓度梯度的升高呈先升后降的趋势.③高接菌量（20%）与低接菌量（10%）对砷污染土壤中微生物群落功能多样性的影响没有显著性差异.④2%生物炭与10%青霉菌处理土壤中微生物群落功能多样性、碳源利用丰度最高.⑤青霉菌对胺类及少部分酸类碳源的利用能力较弱（AWCD < 0.5,AWCD为Biolog微平板孔中溶液吸光值平均颜色变化率）,对氨基酸类中大部分碳源以及脂类碳源的代谢能力较强（AWCD>1.0）,对糖类、酚酸类的代谢能力稍弱（AWCD为0.3~1.0）,青霉菌对D-半乳糖醛酸、L-天冬酰胺酸、L-丝氨酸、L-精氨酸、r-羟基丁酸这5种碳源的利用率最高（AWCD>1.2）.研究显示,低浓度生物炭可增加砷污染土壤中微生物群落多样性,生物炭含量的继续增加会对微生物产生抑制作用;青霉菌添加到砷污染土壤后,会显著提升砷污染土壤中微生物的群落功能多样性,改善砷污染土壤中微生的物群落结构;青霉菌的优势碳源大多为植物根系分泌物,可为后续青霉菌与超积累植物复合修复砷污染土壤提供参考.      

土壤微生物群落结构对生活源和工业源再生水灌溉的差异化响应

为研究不同来源再生水灌溉对土壤微生物群落结构的影响,以地下水灌溉土壤为对照,采用Illumina MiSeq高通量测序技术对长期利用生活源和工业源再生水灌溉的土壤微生物群落结构进行分析,进一步探究土壤环境因子及其相互作用对微生物群落结构的影响.结果表明,与地下水灌溉相比,长期生活源再生水灌溉可显著提高土壤中TOC、 DOC、 Eh、 NH~+_4-N和TP的含量,长期工业源再生水灌溉导致Cd、 Cr、 Cu、 Pb和Zn在表层土壤大量累积.再生水灌溉显著增加了土壤中Acidobacteria和Planctomycetes的相对丰度,降低了Firmicutes和Tectomicrobia的相对丰度,且不同来源再生水对土壤中功能微生物的影响不同,生活源再生水灌溉可显著增加Chloroflexi和Nitrospirae的相对丰度,而工业源再生水灌溉对Actinobacteria具有显著的抑制作用.db-RDA分析结果表明,生活源再生水灌溉土壤菌群主要受TN、 TP、 DOC和Eh影响(P0.05),工业源再生水灌溉土壤菌群主要受重金属影响(P0.05).长期再生水灌溉可改变土壤环境因子间的相互作用,进而影响微生物群落结构,生活源再生水灌溉土壤中微生物主要受DOC、 TN和TP等营养物质含量的增加和氧化还原条件的改变控制,工业源再生水灌溉土壤中微生物与重金属的积累显著相关.     

温度和含水率对村镇垃圾焚烧烟气中有机物排放的影响

使用管式炉模拟村镇生活垃圾焚烧过程,研究不同焚烧温度和不同垃圾含水率条件下,村镇垃圾焚烧烟气中多环芳烃（PAHs）、氯苯及苯系物的生成和分布特性.结果表明,焚烧温度为550℃时,烟气中多环芳烃和氯苯的释放量最大,当温度小于550℃时,多环芳烃和氯苯的释放量随温度升高而增加,温度大于550℃时,多环芳烃和氯苯的释放量随温度升高而降低.高温焚烧不仅可以抑制烟气中多环芳烃的浓度及减少大分子量PAHs的排放,还能降低氯苯的释放量和氯代数,从而减小村镇垃圾焚烧烟气中的毒性;苯系物随着温度升高,由热解转变为高温合成,释放量也随着增加.水分对多环芳烃和氯苯有较大影响,对苯系物的影响较小.在400℃条件焚烧时,水分含量对多环芳烃总体上是促进的,而在850℃焚烧条件下则表现出抑制作用;而水分对氯苯则均表现出抑制作用,并且可以降低氯苯化合物的氯代数.